Main Page

From International Building Code Discussion - IBC 2006

Jump to: navigation, search

Chapter 4
- Section 401. Detailed use and occupancy requirements. In addition to the ...
- Section 402. Kiosks. Kiosks and similar structures (temporary or permanen...
- Section 403. Standby power. A standby power system complying with Section...
- Section 404. General. In other than Group H occupancies, and where permit...
- Section 405. Emergency power. An emergency power system complying with Se...
- Section 406. Private garages and carports. Classification. Buil...
- Section 407. 1 General. Occupancies in Group I-2 shall comply with the pr...
- Section 408. Exit enclosures. One of the required exit enclosures in each...
- Section 409. General. The provisions of this section shall apply to rooms...
- Section 410. Automatic sprinkler system. Stages shall be equipped with an...
- Section 411. General. Special amusement buildings having an occupant load...
- Section 412. Fire suppression. Aircraft hangars shall be provided with fi...
- Section 413. General. High-piled stock or rack storage in any occupancy g...
- Section 414. Aerosols. Level 2 and 3 aerosol products shall be stored and...
- Section 415. Fire separation distance. Group H occupancies shall be locat...
- Section 416. Spray rooms. Spray rooms shall be enclosed with fire barrier...
- Section 417. General.Adrying room or dry kiln installed within a building...
- Section 418. Building features. Manufacturing of organic coatings shall b...
- Section 419. General. Occupancies in Groups I-1, R-1, R-2 and R-3 shall c...
- Section 420. System design. The flammable gas-detection system shall be l...
Chapter 5
- Section 501. Scope. The provisions of this chapter control the height and...
- Section 502. Definitions. The followingwords and terms shall, for the pur...
- Section 503. General. The height and area for buildings of different cons...
- Section 504. General. The height permitted by Table 503 shall be increase...
- Section 505. Fire suppression. Where located in a building that is requir...
- Section 506. General. The areas limited by Table 503 shall be permitted t...
- Section 508. General. Where a building or portion thereof contains two or...
- Section 509. General. The provisions in this section shall permit the use...
Chapter 6
- Section 601. Scope. The provisions of this chapter shall control the clas...
- Section 603. Allowable materials. Combustible materials shall be permitte...
Chapter 7
- Section 701. Scope. The provisions of this chapter shall govern the mater...
- Section 702. Definitions. The followingwords and terms shall, for the pur...
- Section 703. Scope. Materials prescribed herein for fire resistance shall...
- Section 704. Vertical exposure. For buildings on the same lot, opening pr...
- Section 705. Joints. Joints made in or between fire walls shall comply wi...
- Section 706. Ducts and air transfer openings. Penetrations in a fire barr...
- Section 707. Ducts and air transfer openings. Penetrations of a shaft enc...
- Section 708. General. The following wall assemblies shall comply with thi...
- Section 709. General. Smoke barriers shall comply with this section....
- Section 710. General. Smoke partitions installed as required elsewhere in...
- Section 711. General. Floor and roof assemblies required to have a fire-r...
- Section 712. Scope. The provisions of this section shall govern the mater...
- Section 713. General. Joints installed in or between fire-resistance- rat...
- Section 714. Requirements. The fire-resistance rating of structural membe...
- Section 715. General. Opening protectives required by other sections of t...
- Section 718. Thickness of plaster. The minimum thickness of gypsum plaste...
- Section 719. General. Insulating materials, including facings such as vap...
- Section 720. General. The provisions of this section contain prescriptive...
- Section 721. General. The provisions of this section contain procedures b...
Chapter 8
- Section 801. Scope. Provisions of this chapter shall govern the use of ma...
- Section 802. General. The following words and terms shall, for the purpos...
- Section 803. Surface burning characteristic test. Textile wall and ceilin...
- Section 804. General. Interior floor finish and floor covering materials ...
- Section 805. Application. Combustible materials installed on or embedded ...
- Section 806. General requirements. In occupancies in Groups A, E, I and R...
Chapter 9
- Section 901. Scope. The provisions of this chapter shall specify where fi...
- Section 902. Definitions. The followingwords and terms shall, for the pur...
- Section 903. General. Automatic sprinkler systems shall comply with this ...
- Section 904. General. Automatic fire-extinguishing systems, other than au...
- Section 905. During construction. Standpipe systems required during const...
- Section 906. General. Portable fire extinguishers shall be provided in oc...
- Section 907. General. This section covers the application, installation, ...
- Section 908. Group H occupancies. Emergency alarms for the detection and ...
- Section 909. Equipment. Equipment including, but not limited to, fans, du...
- Section 910. General. Where required by this code or otherwise installed,...
- Section 911. Features. Where required by other sections of this code, a f...
- Section 912. Installation. Fire department connections shall be installed...
Chapter 11
- Section 1101. Scope. The provisions of this chapter shall control the desi...
- Section 1102. Definitions. The following words and terms shall, for the pu...
- Section 1103. Where required. Sites, buildings, structures, facilities, el...
- Section 1104. Site arrival points. Accessible routes within the site shall...
- Section 1105. Public entrances. In addition to accessible entrances requir...
- Section 1106. Required. Where parking is provided, accessible parking spac...
- Section 1107. General. In addition to the other requirements of this chapt...
- Section 1108. General. In addition to the other requirements of this chapt...
- Section 1109. Assembly area seating. Assembly areas with fixed seating sha...
- Section 1110. Signs. Required accessible elements shall be identified by t...
Chapter 12
- Section 1201. Scope. The provisions of this chapter shall govern ventilati...
- Section 1202. General. The following words and terms shall, for the purpos...
- Section 1203. General. Buildings shall be provided with natural ventilatio...
- Section 1204. Equipment and systems. Interior spaces intended for human oc...
- Section 1205. General. Every space intended for human occupancy shall be p...
- Section 1206. General. This section shall apply to yards and courts adjace...
- Section 1207. Scope. This section shall apply to common interior walls, pa...
- Section 1208. Minimumroom widths. Habitable spaces, other than a kitchen, ...
- Section 1209. Crawl spaces. Crawl spaces shall be provided with a minimum ...
- Section 1210. Floors. In other than dwelling units, toilet and bathing roo...
Chapter 13
- Section 1301. Scope. This chapter governs the design and construction of b...
Chapter 14
- Section 1401. Scope. The provisions of this chapter shall establish the mi...
- Section 1402. General. The following words and terms shall, for the purpos...
- Section 1403. General. The provisions of this section shall apply to exter...
- Section 1404. General. Materials used for the construction of exterior wal...
- Section 1405. General. Exterior wall coverings shall be designed and const...
- Section 1406. General. Section 1406 shall apply to exterior wall coverings...
- Section 1407. Type I, II, III and IV construction. Where installed on buil...
Chapter 15
- Section 1501. Scope. The provisions of this chapter shall govern the desig...
- Section 1502. General. The following words and terms shall, for the purpos...
- Section 1503. General. Roof decks shall be covered with approved roof cove...
- Section 1504. Wind resistance of roofs. Roof decks and roof coverings shal...
- Section 1505. General. Roof assemblies shall be divided into the classes d...
- Section 1506. Scope. The requirements set forth in this section shall appl...
- Section 1507. Built-up roofs. The installation of built-up roofs shall com...
- Section 1508. General. The use of above-deck thermal insulation shall be p...
- Section 1509. General. The provisions of this section shall govern the con...
- Section 1510. General. Materials and methods of application used for recov...
Chapter 16
- Section 1601. Scope. The provisions of this chapter shall govern the struc...
- Section 1602. Definitions. The following words and terms shall, for the pu...
- Section 1603. General. Construction documents shall show the size, section...
- Section 1604. Wind and seismic detailing. Lateral-force-resisting systems ...
- Section 1605. General. Buildings and other structures and portions thereof...
- Section 1606. General. Dead loads are those loads defined in Section 1602....
- Section 1607. General. Live loads are those loads defined in Section 1602....
- Section 1608. General. Design snow loads shall be determined in accordance...
- Section 1609. Applications. Buildings, structures and parts thereof shall ...
- Section 1610. General. Basement, foundation and retaining walls shall be d...
- Section 1611. Design rain loads. Each portion of a roof shall be designed ...
- Section 1612. General.Within flood hazard areas as established in Section ...
- Section 1613. Scope. Every structure, and portion thereof, including nonst...
Chapter 17
- Section 1701. Scope. The provisions of this chapter shall govern the quali...
- Section 1702. General. The following words and terms shall, for the purpos...
- Section 1703. Approved agency. An approved agency shall provide all inform...
- Section 1704. General. Where application is made for construction as descr...
- Section 1705. General. Where special inspection or testing is required by ...
- Section 1706. Contractor responsibility. Each contractor responsible for t...
- Section 1707. Special inspections for seismic resistance. Special inspecti...
- Section 1708. Masonry. Testing and verification of masonry materials and a...
- Section 1709. General. Where required by the provisions of Section 1709.2 ...
- Section 1710. Conformance to standards. The design strengths and permissib...
- Section 1711. General. In the absence of approved rules or other approved ...
- Section 1712. Where required. Where proposed construction is not capable o...
- Section 1713. General. Whenever there is a reasonable doubt as to the stab...
- Section 1714. General. In evaluating the physical properties of materials ...
- Section 1715. Test standards for joist hangers and connectors. T...
Chapter 18
- Section 1801. Scope. The provisions of this chapter shall apply to buildin...
- Section 1802. General. Foundation and soils investigations shall be conduc...
- Section 1803. Excavations near footings or foundations. Excavations for an...
- Section 1804. Design. The presumptive load-bearing values provided in Tabl...
- Section 1805. General. Footings and foundations shall be designed and cons...
- Section 1806. General. Retaining walls shall be designed to ensure stabili...
- Section 1807. Where required. Walls or portions thereof that retain earth ...
- Section 1808. Definitions. The following words and terms shall, for the pu...
- Section 1809. Timber piles. Timber piles shall be designed in accordance w...
- Section 1810. General. The materials, reinforcement and installation of ca...
- Section 1811. General. Composite piles shall conform to the requirements o...
- Section 1812. General. Isolated and multiple piers used as foundations sha...
Chapter 19
- Section 1901. Scope. The provisions of this chapter shall govern the mater...
- Section 1902. General. The words and terms defined in ACI 318 shall, for t...
- Section 1903. General. Materials used to produce concrete, concrete itself...
- Section 1904. Water-cementitious materials ratio. Where maximum water-ceme...
- Section 1905. Depositing. The depositing of concrete shall comply with the...
- Section 1906. Formwork. The design, fabrication and erection of forms shal...
- Section 1907. Lateral reinforcement for compression members. Lateral reinf...
- Section 1908. General. The text ofACI 318 shall be modified as indicated i...
- Section 1909. Scope. The design and construction of structural plain concr...
- Section 1910. General. The thickness of concrete floor slabs supported dir...
- Section 1911. Scope. The provisions of this section shall govern the allow...
- Section 1912. Scope. The provisions of this section shall govern the stren...
- Section 1913. General. Shotcrete is mortar or concrete that is pneumatical...
- Section 1914. General. Reinforced gypsum concrete shall comply with the re...
- Section 1915. General. Concrete-filled pipe columns shall be manufactured ...
Chapter 21
- Section 2101. Scope. This chapter shall govern the materials, design, cons...
- Section 2102. General. The following words and terms shall, for the purpos...
- Section 2103. Concrete masonry units. Concrete masonry units shall conform...
- Section 2104. Masonry construction. Masonry construction shall comply with...
- Section 2105. General. A quality assurance program shall be used to ensure...
- Section 2106. Seismic design requirements for masonry. Masonry structures ...
- Section 2107. General. The design of masonry structures using allowable st...
- Section 2108. General. The design of masonry structures using strength des...
- Section 2109. General. Empirically designed masonry shall conform to this ...
- Section 2110. Scope. This section covers the empirical requirements for no...
- Section 2111. Definition. A masonry fireplace is a fireplace constructed o...
- Section 2112. Definition.Amasonry heater is a heating appliance constructe...
- Section 2113. Definition. A masonry chimney is a chimney constructed of co...
Chapter 22
- Section 2201. Scope. The provisions of this chapter govern the quality, de...
- Section 2202. Definitions. The following words and terms shall, for the pu...
- Section 2203. Identification. Steel furnished for structural load-carrying...
- Section 2204. Welding. The details of design,workmanship and technique for...
- Section 2205. General. The design, fabrication and erection of structural ...
- Section 2206. General. The design, manufacture and use of open web steel j...
- Section 2207. General. The design, fabrication and erection including rela...
- Section 2208. Storage racks. The design, testing and utilization of indust...
- Section 2209. General. The design of cold-formed carbon and low-alloy stee...
- Section 2210. General. The design, installation and construction of cold-f...
Chapter 23
- Section 2301. Scope. The provisions of this chapter shall govern the mater...
- Section 2302. Definitions. The following words and terms shall, for the pu...
- Section 2303. General. Structural sawn lumber; end-jointed lumber; prefabr...
- Section 2304. Heavy timber construction. Columns. Columns shall ...
- Section 2305. General. Structures using wood shear walls and diaphragms to...
- Section 2306. Allowable stress design. The structural analysis and constru...
- Section 2307. Load and resistance factor design. The structural analysis a...
- Section 2308. Roof and ceiling framing. The framing details required in th...
Chapter 24
- Section 2401. Scope. The provisions of this chapter shall govern the mater...
- Section 2402. Definitions. The following words and terms shall, for the pu...
- Section 2403. Identification. Each pane shall bear the manufacturer�s mark...
- Section 2404. Vertical glass. Glass sloped 15 degrees (0.26 rad) or less f...
- Section 2405. Scope. This section applies to the installation of glass and...
- Section 2406. Human impact loads. Individual glazed areas, including glass...
- Section 2407. Materials. Glass used as a handrail assembly or a guard sect...
- Section 2408. General. Glazing in athletic facilities and similar uses sub...
- Section 2409. Glass in elevator enclosures. Glass in elevator enclosures s...
Chapter 25
- Section 2501. Scope. General. Provisions of this chapter shall g...
- Section 2502. Definitions. The following words and terms shall, for the pu...
- Section 2503. Inspection. Lath and gypsum board shall be inspected in acco...
- Section 2504. Scope. The following requirements shall be met where constru...
- Section 2505. Resistance to shear (wood framing). Wood-framed shear walls ...
- Section 2506. General. Gypsum board materials and accessories shall be ide...
- Section 2507. General. Lathing and plastering materials and accessories sh...
- Section 2508. General. Gypsum board and gypsum plaster construction shall ...
- Section 2509. Wet areas. Showers and public toilet walls shall conform to ...
- Section 2510. General. Exterior and interior cement plaster and lathing sh...
- Section 2511. General. Plastering gypsum plaster or cement plaster shall n...
- Section 2512. General. Plastering with cement plaster shall not be less th...
- Section 2513. General. Exposed natural or integrally colored aggregate is ...
Chapter 26
- Section 2601. Scope. These provisions shall govern the materials, design, ...
- Section 2602. General. The following words and terms shall, for the purpos...
- Section 2603. General. The provisions of this section shall govern the req...
- Section 2604. General. Plastic materials installed as interior finish or t...
- Section 2605. Interior use. Where used within a building, plastic veneer s...
- Section 2606. General. The provisions of this section and Sections 2607 th...
- Section 2607. General. Light-transmitting plastics shall not be used as wa...
- Section 2608. Buildings of Type VB construction. Openings in the exterior ...
- Section 2609. General. Light-transmitting plastic roof panels shall comply...
- Section 2610. Light-transmitting plastic glazing of skylight assemblies. S...
- Section 2611. General. Light-transmitting plastic interior wall signs shal...
Chapter 27
- Section 2701. Scope. This chapter governs the electrical components, equip...
- Section 2702. Installation. Emergency and standby power systems required b...
Chapter 28
- Section 2801. Scope. Mechanical appliances, equipment and systems shall be...
Chapter 29
- Section 2901. Scope. The provisions of this chapter and the International ...
- Section 2902. Minimum number of fixtures. Plumbing fixtures shall be provi...
Chapter 30
- Section 3001. Scope. This chapter governs the design, construction, instal...
- Section 3002. Hoistway enclosure protection. Elevator, dumbwaiter and othe...
- Section 3003. Standby power. In buildings and structures where standby pow...
- Section 3004. Vents required. Hoistways of elevators and dumbwaiters penet...
- Section 3005. General. Escalators, moving walks, conveyors, personnel hois...
- Section 3006. Access. An approved means of access shall be provided to ele...
Chapter 31
- Section 3101. Scope. The provisions of this chapter shall govern special b...
- Section 3102. General. The provisions of this section shall apply to air-s...
- Section 3103. General. The provisions of this section shall apply to struc...
- Section 3104. General. This section shall apply to connections between bui...
- Section 3105. General. Awnings or canopies shall comply with the requireme...
- Section 3106. General. Marquees shall comply with this section and other a...
- Section 3107. General. Signs shall be designed, constructed and maintained...
- Section 3108. General. Subject to the provisions of Chapter 16 and the req...
- Section 3109. General. Swimming pools shall comply with the requirements o...
Chapter 32
- Section 3201. Scope. The provisions of this chapter shall govern the encro...
- Section 3202. Encroachments below grade. Encroachments below grade shall c...
Chapter 33
- Section 3301. Scope. The provisions of this chapter shall govern safety du...
- Section 3302. Remodeling and additions. Required exits, existing structura...
- Section 3303. Construction documents. Construction documents and a schedul...
- Section 3304. Excavation and fill. Excavation and fill for buildings and s...
- Section 3305. Facilities required. Sanitary facilities shall be provided d...
- Section 3306. Protection required. Pedestrians shall be protected during c...
- Section 3307. Protection required. Adjoining public and private property s...
- Section 3308. Storage and handling of materials. The temporary use of stre...
- Section 3309. Where required. All structures under construction, alteratio...
- Section 3310. Stairways required. Where a building has been constructed to...
- Section 3311. Where required. Buildings four stories or more in height sha...
- Section 3312. Completion before occupancy. In buildings where an automatic...
Chapter 34
- Section 3401. Scope. The provisions of this chapter shall control the alte...
- Section 3402. Definitions. The following term shall, for the purposes of t...
- Section 3403. Existing buildings or structures. Additions or alterations t...
- Section 3404. Where permitted. Fire escapes shall be permitted only as pro...
- Section 3405. Conformance. The installation or replacement of glass shall ...
- Section 3406. Conformance. No change shall be made in the use or occupancy...
- Section 3407. Historic buildings. The provisions of this code relating to ...
- Section 3408. Conformance. Structures moved into or within the jurisdictio...
- Section 3409. Scope. The provisions of Sections 3409.1 through 3409.9 appl...
- Section 3410. Compliance. The provisions of this section are intended to m...

Retrieved from "http://www.ibc-wiki.com/index.php/Main_Page"

IBC code required windspeed, groundsnow and
seismic parameters can be obtained instantly
by visiting Design Criteria By Zip

Views

Personal tools

Log in / create account

Search

Toolbox